Showing posts with label HSV. Show all posts
Showing posts with label HSV. Show all posts

Insignia VXR to Make UK Debut at Goodwood Festival of Speed

The high-performance version of the Opel /Vauxhall Insignia will make its first appearance in Britain at this year's Goodwood Festival of Speed that runs from July 3-5. The 325HP Insignia VXR (OPC for the rest of Europe) will run the famous hillclimb course twice a day. Joining the Insignia will be the most powerful production model in Vauxhall's history, the rear-wheel-drive, 6.2-litre supercharged V8 engined VXR8 Bathurst S Edition 560HP that will be performing a 'Smoke Gets in Your Eyes' display in front of the Goodwood House.

GM's British arm will also showcase two concept studies from the past, the gullwing-door XVR that was displayed at the 1966 Geneva Salon and the SRV that made its debut at the 1970 Earls Court Motor Show.

Vauxhall VXR8 Bathurst S with 560HP Supercharged V8

In the land Down-Under, there's a saying that goes "there's nothing like a V8". Well, let's say that for the sake of conversation, we agree with our fellow Australians. What's even better than a 'normal' V8? The answer comes all the way from Great Britain and Vauxhall which introduced a new supercharged version of the Holden Commodore based (Pontiac G8 in the States), HSV Clubsport R8. Thanks to the addition of a Walkinshaw 122 Supercharger, the Vauxhall VXR8 Bathurst S' 6.0-liter V8 dispenses a mighty 560-horsepower, compared with the standard car's 431HP.

Furthermore, Walkinshaw's 122 Supercharger also boosts torque from 550Nm to an impressive 715Nm (529-lbs /ft). No performance figures have been announced, but let's just tell you that the standard 431HP VRX8 with an automatic gearbox accelerates from 0 to 60 mph (96 km/h) in just 4.9 seconds...

For the record, Vauxhall did not only bolt-on a blower to the LS3 V8. The engineered package also includes a large capacity intercooler, high-flow fuel injectors, a separate cold air intake and Walkinshaw-developed ECU map, while the standard manual gearbox is upgraded with a high-torque capacity clutch.

Buyers also have the option of adding a new Bi-Modal Exhaust that raises power by up to 10-horsepower and allows drivers to select one of two noise settings: 'Street', with an upper limit of 92dbA, or 'Optimum', which releases the LS3 V8's full 102dbA. The two-and-a-half inch diameter system is manufactured from stainless steel with unique chrome tail-pipe finishers and costs £1600.

Other modifications concern the new six-pot front and four-pot rear brake calipers stiffer, height-adjustable springs and Walkinshaw-developed coil-over dampers that have 15 separate valve settings with independent corner adjustment for the owner's preferred setup.

On the outside, the Bathurst S is identifiable by a distinctive graphic pack, front fog light covers and 'Bathurst' badges while inside a console-mounted badge showing the car's build number complements the 'Walkinshaw Performance' tread plates found inside each door opening.

The Vauxhall VXR8 Bathurst S will be produced in a limited number of units with prices in the U.K. set at £44,995 which comes to $66,520 U.S, $99,520 AUS and €51,300 with today's exchange rates.


HSV W427 503HP Commodore Enters Production – 38 High Res Photos / Wallpapers

The “Lion King” of all Holdens, the Commodore based HSV W427 is now available for order in Australia and New Zealand. But good luck trying to get one as all 90 cars being built in 2008 have been pre-sold. Overall, HSV will build no more than 427 W27s with prices (not including the new Luxury Car Tax regime) set at $155,500 AUD.

Designed as Australia’s answer to the BMW M5, the HSV W427 is equipped with the Corvette Z06’s 7.0-liter or 427.ci LS7 V8 engine developing a thundering 503Hp (375kW) and 640Nm of torque. Even though production has started, HSV has yet to release any official performance figures but we pretty sure that Holden’s four-door muscle car won’t leave anyone disappointed. -Photos after the jump